Why switch
Hygiene challenges with conventional degassing equipment
In hygiene-critical production lines, the cleanability of the degassing equipment itself determines product quality and safety.
Cannot clean equipment internals
The degassing unit cannot be disassembled, allowing residual fluid to accumulate inside and creating cross-contamination risks between product batches.
Cleaning is time-consuming
Cleaning requires specialized tools and labor, with lengthy downtime for every disassembly and reassembly cycle.
Hard to verify internal cleanliness
Equipment internals cannot be visually inspected, making it difficult to demonstrate cleanliness during audits and validation.
Accumulating cleaning costs
Labor for cleaning, disassembly/reassembly, and verification adds up over time, inflating total cost of ownership.
Value of switching
Why customers choose the Bubble Eliminator
01
Full disassembly cleaning for thorough hygiene
The sanitary type can be disassembled for direct internal cleaning and visual inspection. Validate cleaning results against the requirements of the production line.
02
CIP cleaning compatible
Clean-in-place (CIP) is also supported without removal from the line. Choose the CIP and disassembly schedule according to the process and validate cleaning results.
03
Drop-in installation on existing lines
Low pressure drop design with no orientation restrictions. Simply splice into your piping — no major line modifications required.
04
No dedicated power — continuous operation
Operates 24/7 on existing line pressure alone. No consumable parts, keeping running costs low.
How it works
Dual Cyclone Technology — No Dedicated Power
Fluid enters using existing line pressure.
A swirl flow leverages density differences
to concentrate bubbles along the central axis
for continuous removal. No additional power source needed.
01
Generate swirl flow
Fluid enters under existing line pressure, and a proprietary internal structure generates a high-speed swirl flow.
02
Gas-liquid separation
Density differences between gas and liquid concentrate bubbles along the central axis of the vortex.
03
Continuous removal
Separated bubbles are continuously discharged from the system without interrupting flow.
The result:
no dedicated power,
no consumable parts,
disassembly cleaning and CIP options.
no dedicated power,
no consumable parts,
disassembly cleaning and CIP options.
Cleaning methods and hygiene requirements
When to use disassembly cleaning or CIP
The sanitary configuration allows direct cleaning of wetted parts after disassembly. CIP while the unit remains in the line can also be considered. The appropriate method depends on the liquid and process.
Check residues, cleaning agents, temperature, cleaning frequency and hygiene requirements. Evaluate cleaning results and reassembly procedures against the standards for the actual production line.
See the manufacturer’s specifications and drawings for sanitary disassembly, CIP compatibility and configuration details.
Before / After
What changes when you switch
CONVENTIONAL DEGASSING
×Equipment internals cannot be disassembled for cleaning
×Cross-contamination risk from residual fluid
×Internal cleanliness cannot be visually verified
×Must remove from piping for every cleaning cycle
×Requires dedicated power & additional equipment
BUBBLE ELIMINATOR (SANITARY TYPE)
✓Full disassembly for thorough internal cleaning
✓Helps manage cross-contamination risk between batches
✓Allows visual inspection of internal surfaces
✓CIP compatible for easy routine cleaning
✓Operates on existing line pressure — 24/7 continuous degassing
Applications
Solving bubble problems
across diverse production lines
FOOD & BEVERAGE
Food & beverage filling
Pre-fill degassing can support fill accuracy. The unit can be disassembled and cleaned between batches.
PHARMA & COSMETICS
Pharmaceutical & cosmetics
Disassembly allows direct cleaning and visual inspection of internal surfaces. Verify cleanliness against the requirements of each production line.
COATING
Coating & surface treatment
Eliminates bubbles from coating fluids to reduce streaks and pinholes. Internal cleaning simplifies color changeovers.
SEMICONDUCTOR
Semiconductor & electronics cleaning
Removes bubbles from cleaning fluids to prevent adhesion defects and uneven cleaning results.
* Results may vary depending on operating conditions.
FAQ
Frequently asked questions
The sanitary type can be disassembled with simple tools, allowing direct access to internal surfaces for thorough cleaning.
Reassembly is straightforward, enabling quick return to operation.
Reassembly is straightforward, enabling quick return to operation.
Yes, the sanitary type supports CIP cleaning.
Combine CIP and disassembly cleaning as needed, and validate the method against the production line's hygiene requirements.
Combine CIP and disassembly cleaning as needed, and validate the method against the production line's hygiene requirements.
We offer SUS316L, SUS304, SS400 equivalent, PVC, and H-PVC — selected to match your process fluid requirements.
1 L/min and above, with no upper limit on maximum flow rate.
With its low pressure drop and omnidirectional installation capability,
the unit can typically be spliced into existing piping. Connection ports and device configuration are custom-engineered to match your system.
the unit can typically be spliced into existing piping. Connection ports and device configuration are custom-engineered to match your system.
Device configuration, connections, and materials are custom-engineered to match your line,
so standard specifications vary by application. Please contact us for details — we will propose the optimal configuration for your needs.
so standard specifications vary by application. Please contact us for details — we will propose the optimal configuration for your needs.